Amazing 3D Butterfly Yard Art

This listing is for a custom-made 3D Butterfly. Our butterflies are made from mill finish aluminum that has been plasma cut, sanded, brushed and machine bent to give all 3 parts a sleek design that gives depth and dimension to any space you may have. The sleek caps and barrel hardware used to connect the butterfly’s 3 parts is also made aluminum. Don’t see a size you want listed? Feel free to message us for a custom quote. Have a specific pattern you want in the wings? Feel free to message us for a custom quote. Interested in a flock? Or combo of butterflies and dragonflies? Feel free to message us for a bulk quote. Maintenance and Care Note – These signs are made from aluminum and will not rust in or outdoors. I do want to add that finger prints will show up on the art over time if not cleaned or protected. Please take extreme caution during installation to ensure finger prints are not left. It is also suggested for maximum durability, an additional layer of protection and ease of cleaning, that a light clear coat or paint should be applied. As for cleaning the raw surface if left in the raw brushed aluminum state, then we suggest denatured alcohol to ensure any oils left by the human hand is dissolved and cleaned from the art. Wall Mount Option – Each piece is mean to hang on the wall and has standard mounting holes that can be used. For the wall mount, we suggest using sufficient anchors for your application based upon weight, mounting area, and mounting material. Due to the variety of mounting options, no mounting hardware in included. Just mounting holes and assembly hardware are included with this option Hanging Mount Option – This option still has the wall mount holes so by adding this option it could be wall mounted or hung. The Hanging mount option comes with 4 additional pieces of hardware that when attached to the art, it allows the customer to use a monofilament, wire or other methods they see fit to hang the art from the ceiling. Due to the variety of mounting locations, angles, heights and locations. Monofilament, wire or other “hanging” material is not included, this option only adds the needed hardware to allow for (4) hooks on the backside and matching aluminum caps on the front are added to the art so a monofilament or wire can be attached.